Nằm ngang Tự cân bằng Đa tầng bơm(không đĩa cân bằng)
Horizontal Self Balancing Multistage Pump(without balancing disc)
Mô tả
Mô tả
The horizontal multi-stage self balancing pump is of New technology and new structure that rotor components with symmetric impellers, the product offsets the axial thrust generated during operation of forward and backward sets of impellers. In this way, the balancing disc device with small clearance and high pressure drop, which is easily flushed, worn and fails is not needed to keep axial force balancing, breaking the kết cấu truyền thống of multi-stage pump. Unique throttling and pressure relieving device, odd-level balancing device, playing a supporting role.
Thông số
● DN: 40-350mm
● Flow: 3.75-1360m3/h
● Head: 92-1500m
● Motor Power: 7.5-4,000kw
Vật liệu
DP Series
Fluid: Pure water, below 80℃
Vật liệu: chi tiết dòng chảy
Vật liệu: Cast iron
DFP Series
Fluid: Oil, temperature below 80℃, Viscosity less than 120 cSt
Vật liệu: chi tiết dòng chảy
material: Thép đúc or cast stainless steel based on temperature and causticity of the fluid.
DYP Series
Fluid: Corrosive fluids, -20℃~105℃
Vật liệu: chi tiết dòng chảy
material: Cast iron, cast steel or cast stainless steel based on temperature of the fluid
DMP Series
Fluids with solids ≤1.5%, dia. ≤0.5mm, temperature -20~80℃
Vật liệu: Flow passage
Vật liệu: wear-resistance iron or ductile iron.

Lợi thế cạnh tranh
● High reliability, High cavitation resistance, Strong reliability of mechanical seal, Low maintenance rate, Strong applicability.
● High efficiency and energy conservation: Advanced hydraulic model and independently developed high-efficiency energy-saving, 2%-3% higher than ordinary multi-stage pump in efficiency.
● Easy maintenance: Without dismantling the pump body and inlet/outlet pipelines. There are no wearing parts such as balancing disc in the pump, thus saving time for overhauling and inspection.
● Low maintenance rate: Precise casting is adopted, thus reducing wearing components and times of maintenance and disassembly, extending service life, avoiding problems caused by too many times of disassembling, and lowering the maintenance cost.

