Horizontal Self balancing Multi tahap pompa(tanpa cakram balancing)
Horizontal Self Balancing Multistage Pump(without balancing disc)
Deskripsi
Deskripsi
The horizontal multi-stage self balancing pump is of New technology and new structure that rotor components with symmetric impellers, the product offsets the axial thrust generated during operation of forward and backward sets of impellers. In this way, the balancing disc device with small clearance and high pressure drop, which is easily flushed, worn and fails is not needed to keep axial force balancing, breaking the struktur tradisional of multi-stage pump. Unique throttling and pressure relieving device, odd-level balancing device, playing a supporting role.
Parameter
● DN: 40-350mm
● Flow: 3.75-1360m3/h
● Head: 92-1500m
● Motor Power: 7.5-4,000kw
Material
DP Series
Fluid: Pure water, below 80℃
Material: bagian aliran
Material: Cast iron
DFP Series
Fluid: Oil, temperature below 80℃, Viscosity less than 120 cSt
Material: bagian aliran
material: Baja coran or cast stainless steel based on temperature and causticity of the fluid.
DYP Series
Fluid: Corrosive fluids, -20℃~105℃
Material: bagian aliran
material: Cast iron, cast steel or cast stainless steel based on temperature of the fluid
DMP Series
Fluids with solids ≤1.5%, dia. ≤0.5mm, temperature -20~80℃
Material: Flow passage
Material: wear-resistance iron or ductile iron.

Keunggulan kompetitif
● High reliability, High cavitation resistance, Strong reliability of mechanical seal, Low maintenance rate, Strong applicability.
● High efficiency and energy conservation: Advanced hydraulic model and independently developed high-efficiency energy-saving, 2%-3% higher than ordinary multi-stage pump in efficiency.
● Easy maintenance: Without dismantling the pump body and inlet/outlet pipelines. There are no wearing parts such as balancing disc in the pump, thus saving time for overhauling and inspection.
● Low maintenance rate: Precise casting is adopted, thus reducing wearing components and times of maintenance and disassembly, extending service life, avoiding problems caused by too many times of disassembling, and lowering the maintenance cost.

