수직 터빈 혼합 플로우 펌프
설명
설명 (Description)
Pump 건설
● The pump is vertically installed with the inlet vertical downward and the outlet horizontal extending.
● 로터 요소는 pull-out 또는 non-pull out 일 수 있습니다.
● 유형 T 펌프의 블레이드는 작동 중에 조정할 수 있습니다.
● The pump installation has two ways: One is single foundation,i.e.
● The pump and the motor are connected directly and mounted on one concrete foundation, the other is double foundation, i.e.
● 펌프와 모터는 별도의 콘크리트 기초 위에 장착됩니다.
● 인장은 일반적으로 포장 씰을 사용합니다.
● The intake sump of the pump can be wet pit or dry pit.
● The axial thrust of the pump is usually carried by the motor,that of small pump is carried by pump itself.
● The impeller of the pump is usually one stage and it can be designed as multistage as requirements.
● 펌프의 베어링은 고무 베어링 또는 베어링입니다. 고무 베어링을 사용할 때 샤프트에는 윤활을 위해 압력 맑은 물이 들어 있는 샤프트 슬리브가 있습니다.
매개 변수
● 안전하고 신뢰할 수 있는 작동 및 긴 수명
● High efficiency ranging from 85% to 89%, wide range of high efficiency. The curve of shaft power is smooth, so the condition of excess the rated power in operation doesn't result from working operation deviation.
● 좋은 NPSH 조건
● 공간 절약, 단순히 흡입 채널.
● 합리적인 건축, 조립 및 해체가 편리하고 유지 보수가 용이합니다.
| 용량 Q 범위 : | 0.2 - 25m3/s |
| 헤드 H 범위 : | 3 - 60 m |



애플리케이션
The pumps have been used for handling circulating water in large scale power stations and nuclear power stations, metallurgy, water supply &drainage of civil engineering and farmlands as well as mining drainage. They are provided for delivering clear water, rainwater, sewage and seawater.
경쟁 우위 점
우리의 회사에서 제조 된 수직 터빈 펌프의 모든 항목은 투자 주조, 마무리 주조 다이, 정확한 주조 금형.Our 항목은 넓은 지역을 범위.

