مضخة التدفق المختلطة التوربينات العمودية
الوصف
الوصف
بناء المضخة
● The pump is vertically installed with the inlet vertical downward and the outlet horizontal extending.
● يمكن أن تكون العناصر الدوارة قابلة للانسحاب أو عدم الانسحاب.
● يمكن أن تكون شفرات مضخة T من النوع قابلة للتعديل في العملية.
● The pump installation has two ways: One is single foundation,i.e.
● The pump and the motor are connected directly and mounted on one concrete foundation, the other is double foundation, i.e.
● يتم تركيب المضخة والمحرك على أساس خرساني منفصل.
● الختم عادة ما يستخدم ختم التعبئة.
● The intake sump of the pump can be wet pit or dry pit.
● The axial thrust of the pump is usually carried by the motor,that of small pump is carried by pump itself.
● The impeller of the pump is usually one stage and it can be designed as multistage as requirements.
● محامل المضخة هي محامل مطاطية أو محامل. عندما يتم استخدام محامل مطاطية ، فإن العمود يحتوي على أكمام رمح مع ضغط الماء الصافي للتزييت.
المعلمات
● عملية آمنة وموثوقة وحياة طويلة.
● High efficiency ranging from 85% to 89%, wide range of high efficiency. The curve of shaft power is smooth, so the condition of excess the rated power in operation doesn't result from working operation deviation.
● حالة NPSH مواتية.
● توفير المساحة ، ببساطة قناة شفط.
● بناء معقول ، مريحة لتجميع وتفكيك ، سهلة للصيانة.
| قدرة Q مجموعة: | 0.2 - 25m3/s |
| مجموعة الرأس H: | 3 - 60 m |



التطبيق
The pumps have been used for handling circulating water in large scale power stations and nuclear power stations, metallurgy, water supply &drainage of civil engineering and farmlands as well as mining drainage. They are provided for delivering clear water, rainwater, sewage and seawater.
ميزة تنافسية
جميع البنود من مضخة التوربينات العمودية المصنعة من شركتنا مصنوعة من قبل الاستثمار الصب، الانتهاء من يموت يلقي، دقيقة الصب العفن. لدينا البنود مجموعة واسعة من مساحة.

