수직터빈 펌프
설명
설명 (Description)
This kind of vertical drainage pump is mainly used for pumping no
corrosion, temperature less than 60 °C, suspended solids (not including
fiber, the grits) less than 150 mg/L content of the sewage or waste
water.
VTP type vertical drainage pump is in VTP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
매개 변수
| 출구 지름: | 100~2600mm |
| 용량: | 40~72000m3/h |
| 머리: | 5~260m |
| 솔리드 매개변수: | ≤80mg/L |
| 허용되는 압력: | ≤ 4Mpa |




애플리케이션
수직 터빈 펌프는 발전소, 제철소, 수도 회사, 하수 처리 공장, 석유 화학 물질, 광산과 같은 산업 및 광업 기업뿐만 아니라 도시의 물 공급 및 배수 프로젝트, 농업 관개, 홍수 통제 및 배수 프로젝트에 적합하며 깨끗한 물, 빗물, 철 구덩이 물, 하수 및 바닷물과 같은 매체를 운송하는 데 사용할 수 있습니다.
경쟁 우위 점
우리의 회사에서 제조 된 수직 터빈 펌프의 모든 항목은 투자 주조, 마무리 주조 다이, 정확한 주조 금형.Our 항목은 넓은 지역을 범위. We can make it for fire fighting used with NFPA20 Standard. We can make energy saving vertical turbine pump and the blades can be removed and the angle can be adjusted during installation.

